Xk-P50s Thermal conductive silicone pad has high thermal conductivity 5.0W/ MK, low thermal resistance, low hardness, good electrical insulation and good compression characters, which designed for low stress applications. Recently, it has perfectly replaced BERGQUIST Gap Pad 5000S35 and won orders from leading auto parts manufacturer in Europe.
GOLDLINK TONGDA thermal conductive silicone pad perfectly replace BERGQUIST pad, and won the orders from leading auto parts manufacture in Europe.
As early as last August, Alex, a purchasing representative of a European auto parts manufacturer, contacted GOLDLINK TONGDA through the official website. Alex told us that they had been using BERGQUIST Gap PAD 5000S35 thermal conductivity silicone pad, due to cost reasons, now urgently need to find a thermal conductivity silicone pad in China that can completely replace BERGQUIST PAD 5000S35 in performance. Alex sent us thermal conductivity silicone pad specifications, with detailed application requirements and product specifications drawing, so that we can offer substitute pad, which must be consistent with BERGQUIST Gap PAD 5000S35,the thickness is 0.5mm, Voltage resistance above 4800V, at the same time, thermal silicone pad is required to be shipped in rolling style, to convenient for automatic robot operation. After detailed communication and confirmation, we immediately recommended the XK-P50S thermal conductive silicone pad with glass fiber reinforcement and thermal conductivity of 5W/MK to the customer, that suitable for application on IGBT module. Xk-p50s thermal conductivity silicone pad is a mature thermal conductive product of GOLDLINK TONGDA. It is in long-term stable production. Its excellent performance of high thermal conductivity, high insulation and tensile resistance has been verified and approved by customers of several new energy vehicle enterprises and is under long-term supply.
GOLDLINK TONGDA thermal conductivity silicone pad XK-P50S has thermal conductivity 5.0W/MK, same as the BERGQUIST Gap PAD 5000S35 ,The thickness is from 0.3 to 3.0mm, so it is no problem to satisfied with customers, The voltage resistance is greater than 10KV/mm, higher than the Gap PAD 5000S35 voltage resistance only 5KV/mm; The thermal resistance of the Gap PAD 5000S35 is 0.29 ° C in²/W at 0.5mm 14.5psi, and the thermal resistance of the Gap PAD 5000S35 is 0.3 ° C in²/W. Therefore, all performance parameters of the XK-P50S thermal silicone pad are above customer requirements. After two weeks receiving the xK-P50S sample of the thermal conductivity silicone pad sent by us, and then customer e-mailed us the test results: The comprehensive performance of XK-P50S thermal conductivity silicone pad was excellent. Under the same conditions and test standards, the parameters of thermal resistance and tear resistance were slightly higher than that of BERGQUIST Gap Pad 5000S35. After that, we went through the commercial quotation process, sample specification packaging, domestic third-party laboratory test and strict verification by the third-party external laboratory in Europe. Then, we confirmed the production of finished product packaging, and finally realize the mass production last month. The European head auto parts manufacturer finally chose GOLDLINK TONGDA thermal silicone pad XK-P50S among many domestic manufacturers, which makes us more proud and gratified.
Gap PAD 5000S35, XK-P50S thermal conductivity silica gel sheet is the best choice, has the following advantages that customers cannot resist:
If you want to instead of BERGQUIST Gap Pad 5000S35, It is no doubt GOLDLINK TONGDA is the best choice, we have advantage as followed:
1） To inspection of raw materials is regarded important source control for GOLDLINK TONGDA , which do not pay attention for others thermal companies.
2) The raw materials of thermal conductivity silicone pad are produced by nanoscale grinding machine for secondary processing, which may be considered unnecessary by other thermal companies. However, with the unique particle size optimization method of GOLDLINK TONGDA, the thermal resistance of GOLDLINK TONGDA silicone pad is lower than others production under the same conditions, and the thermal conductivity performance degradation is smaller in the long-term service process.
3) Thermal conductivity of Xk-p50s silicone pad is 5W /m* K, thermal resistance is lower than BERGQUIST, the most important key is that cost can be reduced by 25%.
4) XK-P50S Thermal conductive silicone pad can meet the more than 30% requirements of high thermal conductivity compressibility, currently no second domestic manufacturer can realize.
5) XK-P50S Thermal conductive silicone pad has been mass-produced, delivered and applied to famous enterprises of new energy vehicles, 5G communications and National Day parade equipment, quality is guaranteed .
The quality of GOLDLINK TONGDA thermal conductive silicone pad achieved a professional standard international first-line brand. It has served new energy vehicles, UAV, 5G communication, military industry and other top customers for almost 14 years, and the products and technologies are excellent.
Perfect substitute for the international first-line brand thermal conductivity silicone pad, please choose GOLDLINK TONGDA, Welcome to inquire sample!
